SUIZAN 5-Inch Drywall Jab Saw – Japanese Hand Pull Saw for Wallboard Cutting Tools
$14.88
- Additional information
- Reviews (10)
Additional information
| Asin | B0CWNVKJDF |
|---|---|
| Dimensions | 11.42"L x 0.79"W x 1.06"H |
| Weight | 1.76 ounces |
| Manufacturer | SUIZAN |
Jesse J. –
Suck trying to cut drywall bends easy.
Cuts wood nice. Don’t buy to.cut drywall you will be disappointed.
Tbone –
I ordered this ‘SUIZAN 5-Inch Drywall Jab Saw’ to use when I had to replace a piece of drywall in my Daughter’s entryway. It looked like it would get the job done.
I’m mostly satisfied with the performance of this ‘SUIZAN 5-Inch Drywall Jab Saw’. It was easy to cut with, and the edges of the cut were relatively clean when compared to using my old drywall saw.
ONe thing I really like about this ‘SUIZAN 5-Inch Drywall Jab Saw’ is how sharp the point it. It’s really easy to start a drywall cut with this saw. The tip literally just pushes in like it was going into butter. The blade itself, though, did not seem to be as sharp as you’re led to believe it is. It worked fine, but the tip of the blade is what’s really sharp.
This saw is relatively comfortable to use. The handle is not nearly as ergonomic as Zi would like. And it’s also a bit slippery, so it hard to hang onto.
AL in all, this ‘SUIZAN 5-Inch Drywall Jab Saw’ is great for starting cuts…works ok at cutting…and is somewhat comfortable to use.
Wm –
Not good bends and not good for drywall hanger
Net Prophet –
When I received this saw, I wasn’t sure it was going to work out. It weighs next to nothing and the blade is incredibly thin. The manufacturer claims it weighs 1.75 ounces – less than a large egg – and they’re correct. The trick is in the handle. It’s made of balsa with a plastic grip around it. That means all of the real weight is in the blade. That would make it an unbalanced fighting knife but that’s not what this saw is for.
I thought it would never survive use as a jab saw. I figured that my first jab would probably result in the blade warping and launching the saw from my hand. With visions of A Christmas Story in my mind, I heard children chanting the chorus “you’ll shoot your eye out.” Hmmm.. perhaps I should wear eye protection.
While wearing eye protection is frequently a good idea, this saw did not realize my vision purloining visions. It went right through the wallboard with a single stab. The blade’s very short height – around ¼” – makes it possible to create an incredibly accurate cut. Because it cuts on the pull (not the push) most of the drywall dust ends up behind the wall making cleanup easier.
In the end, this is a really great tool for its single purpose, making it possible to cut extremely precise holes in wallboard. For other purposes, you;re probably better off using something else.
Mister T –
I was interested in the Suizan drywall saw because it had a thinner blade and sharp, fine teeth for cutting. The saw performs very well and cuts cleanly…with its thinner blade making it easier to cut curves. However, the thinner blade flexes too much when trying to pierce or stab through 1/2″ drywall board. My older drywall saw is heftier…and can stab through drywall board with no problem. I also found that that Suizan’s thinner blade generated less dust…but that really isn’t an issue. I’ll keep both saws when working with drywall and use the one which suits my needs.
Your Shopping Muse –
My husband loves it he cuts drywall on most jobs he does and he can’t complain. It is super light and accurate when cutting. This is a great tool for your money instead of getting it for twice the price in the store.
John Stumbaugh –
Love how it’s made
J. Thomas –
I hate dealing with drywall, but this saw makes things a little easier. It’s quick and effective and a great addition to my tool chest.
T. Lonie –
I’m a fan of Suizan, having already had a couple of their other saws, so I jumped at the chance to get this one. I have to say, I’m sort of surprised at the condition of the handle. The main issue is that there is a bunch of ragged tearout on the wood portion below the wrap. (See picture) I haven’t had this problem with my other Suizans so I don’t know what happened here. It’s not the worst thing ever; I can sand it down myself, but this is the sort of thing I’d expect to see on a tool from the dollar store, not something from a respected woodworking brand out of Japan. Seems strange.
Other than the condition of the handle, the handle material itself feels as light as balsa wood. It’s a very light tool, and I suppose it feels balanced, but the very light weight combined with the state of the handle makes this feel once again like a tool from the dollar store. The only brand marking being on a sticker that wraps the handle doesn’t help. The overall fit and finish just feels like an afterthought.
So, the handle leaves a lot to be desired, but the handle is secondary to the blade of a saw, so how is that? Well it’s really good. I tested it out on an inconspicuous spot of drywall in my garage, and once you get the blade through it cuts like a precision scalpel. Smooth and easy. It’s great. Getting the tip through in the first place takes maybe 10 seconds of rocking your way into it, and wasn’t intuitive to my wife, but I don’t think most people will have an issue if using a good technique.
I do wish there was a label on the blade itself, since it is clearly a quality item. If there was I might be willing to make a new handle for it. As it is, I’ll just use it when needed but not necessarily be able to appreciate the overall quality tool it could have been.
Joe K –
Where has this knife been all my life. I use for drywall. The speed and precision awesome. I love it